The EuroPipeline drainage portfolio includes high-performance twin-wall and underground drainage systems engineered for non-pressure surface and subsurface water management across infrastructure, commercial, industrial, and renewable energy projects.
Available in a wide range of diameters, our drainage solutions are offered in solid, perforated, and partially perforated configurations to suit varying site and hydraulic requirements. Perforated systems are designed to collect and control surface water, while solid systems support the conveyance, attenuation, and controlled discharge of water.
A comprehensive range of compatible fittings and accessories is available to ensure complete, system-led drainage solutions tailored to each application.
MetroDrain pipes are designed for the effective collection and disposal of surface and sub-surface stormwater. Engineered specifically for environmental water management, MetroDrain products integrate seamlessly with pumps and sampling chambers, catchpits, soakaways, manholes and stormwater attenuation systems.
‘LC’ denotes Low Carbon, delivering a 48% reduction in embodied carbon compared to the standard MetroDrain pipe. Offering the same high level of performance with almost half the carbon footprint, MetroDrain LC has been developed for a world where sustainability is paramount.
N-Drain is a non-BBA certified twinwall drainage pipe system, available in solid carrier drain, fully perforated and half-perforated* configurations. While N-Drain is a non-sealed system as standard, seals can be incorporated to prevent soil ingress where required.
Supporting our surface water drainage pipe and fitting systems, we supply an extensive range of gullies and adaptors, together with custom-designed fabricated solutions for catchpits, manholes and flow control chambers.
This single-wall, corrugated land drainage pipe is manufactured from high-density polyethylene and is designed to deliver efficient water conveyance while remaining quick and straightforward to install.
The Agri-Drain System has been developed to effectively manage and reduce surface water run-off in agricultural environments. The system utilises a single-wall, corrugated pipe manufactured from high-density polyethylene (HDPE).
Agri Wrapped Land Drainage has been developed for use in sandy ground conditions or environments where water carries fine sediment. The integrated geotextile wrap acts as an effective filtration layer, preventing fine particles from entering the drainage pipe.
Our high-strength inspection chambers and catchpits have been developed to support efficient surface water management systems, providing reliable above-ground access for inspection and maintenance.
Land drainage systems are designed to deliver reliable and efficient water management across a wide range of drainage applications. Manufactured from high-quality recycled HDPE (rHDPE), these durable ducting solutions provide long-lasting performance while supporting sustainable construction practices.
This range of connectors is specifically designed to complement land drainage systems, providing secure, reliable and efficient connections across a variety of drainage applications. Engineered for durability and ease of installation, these fittings support dependable system performance in both standard and bespoke drainage configurations.
The Maxi Branch range is specifically designed to support efficient and reliable connections within land drainage systems. Manufactured for durability and ease of installation, these fittings provide dependable performance across a variety of drainage applications while ensuring seamless integration with existing infrastructure.
The MultiBranch range is designed to provide efficient and reliable branching connections within land drainage systems. Engineered for durability and ease of installation, these fittings ensure secure integration and dependable performance across a wide range of drainage applications.
These reducer fittings are specifically designed to provide smooth and secure transitions between different duct sizes within land drainage systems. Engineered for durability and ease of installation, they ensure efficient flow management while maintaining system integrity across a range of drainage applications.
The Twin Wall drainage systems are designed to deliver exceptional strength, durability and hydraulic performance across a wide range of drainage applications.
These bend fittings are specifically designed to provide smooth and efficient directional changes within land drainage systems. Engineered for strength, durability and ease of installation, they ensure reliable network performance while maintaining optimal flow characteristics across a wide range of drainage applications.
Catchpits are purpose-designed to enhance the performance and efficiency of land drainage systems. Built for durability and dependable operation, they provide an effective solution for managing surface water, collecting debris and supporting the long-term integrity of drainage networks.
Twin Wall couplers are specifically designed to provide secure, reliable connections within land drainage systems. Engineered for strength, durability and ease of installation, these fittings ensure seamless jointing while maintaining the structural integrity and performance of the overall drainage network.
These end caps are specifically designed to provide a secure and reliable termination point within land drainage systems. Engineered for durability and ease of installation, they help protect the integrity of the network by preventing the ingress of dirt, debris and unwanted contaminants.
These lateral connectors are specifically designed to provide secure and efficient branch connections within land drainage systems. Engineered for durability and ease of installation, they enable reliable integration between branch lines and main pipelines while maintaining optimal system performance.
These seal fittings are specifically designed to provide secure, watertight connections within land drainage systems. Engineered for reliability and long-term performance, they help protect network integrity by preventing the ingress of water, dirt and debris across a wide range of drainage applications.
These Tee Junction fittings are specifically designed to provide secure and efficient branch connections within land drainage systems. Engineered for durability and ease of installation, they enable reliable flow distribution while maintaining the structural integrity and performance of the drainage network.
These lateral connectors are specifically designed to provide secure and efficient branch connections within land drainage systems. Engineered for durability and ease of installation, they enable reliable integration between branch lines and main pipelines while maintaining optimal system performance.
These Twin Wall to Sewer fittings are specifically designed to provide a secure and efficient connection between twin wall drainage systems and sewer networks. Engineered for durability and ease of installation, these fittings ensure reliable system integration while maintaining optimal flow performance and long-term network integrity.
These Y-Junction fittings are specifically designed to provide efficient and reliable branch connections within land drainage systems. Engineered for durability and smooth flow transition, they support optimal network performance while maintaining the structural integrity of the drainage system.
These Large Diameter drainage systems are engineered to deliver high-performance water management for major infrastructure and civil engineering projects. Manufactured from reprocessed HDPE, these systems combine strength, durability and sustainability while offering a lightweight alternative to traditional concrete and clay pipe solutions.
MAGNUM Performante SN10 is a high-performance double-wall corrugated sewer pipe manufactured from high-density polyethylene (HDPE).
Pipe Tracer is a high-precision geolocation and asset referencing system designed for underground utility networks.
Plug&Play™ is a push-fit connection system designed for fast, secure and reliable jointing of PE pressure pipes operating at pressures up to PN16.
Manufactured from high-density polyethylene (HDPE), our solid wall pipes are designed to deliver reliable, long-term performance across a wide range of pressurised and non-pressurised pipeline applications.
HDPE solid wall pipes are engineered to provide a robust, reliable and long-lasting solution for pressurised sewerage and wastewater networks.
PE100 RC Type 1 solid wall pipes are manufactured from high-density polyethylene (HDPE) PE100 RC, offering a Minimum Required Strength (MRS) of 10 MPa and a design stress (σS) of 8.0 MPa.
PE100 RC Type 2 solid wall pipes are manufactured from high-density polyethylene (HDPE) PE100 RC, offering a Minimum Required Strength (MRS) of 10 MPa and a design stress (σS) of 8.0 MPa.
SGK HDPE Spiral Pipes are manufactured using advanced spiral winding technology to provide a high-performance solution for non-pressurised underground sewerage and drainage networks.
SGS Composite Spiral Pipes combine the durability of high-density polyethylene (PE) with the structural strength of steel to provide a high-performance solution for non-pressurised underground sewerage and drainage networks.
CorPress™ is a high-performance double-shell mechanical joint designed to provide secure, watertight connections for corrugated polyethylene (PE) and polypropylene (PP) pipes.
Hydro16 is a high-performance double-wall corrugated pipe system manufactured from polypropylene (PP) for non-pressurised drainage and sewerage applications.
MAGNUM is a high-performance double-wall corrugated pipe system manufactured from high-density polyethylene (HDPE) for non-pressurised drainage and sewerage applications.
Slow Flow is a specialised double-wall corrugated pipe system manufactured from high-density polyethylene (HDPE), designed specifically for drainage installations on steep gradients.
SGPVC Sewer pipes are solid wall unplasticised polyvinyl chloride (U/D-PVC) systems designed for non-pressurised wastewater and sewerage applications.
PVC BUILDING pipes are solid wall polyvinyl chloride (PVC) systems designed for non-pressurised internal building applications and building-adjacent installations.
CENTRALDRENI pipes are solid wall systems manufactured from high-density polyethylene (HDPE), designed specifically for underground drainage applications requiring controlled water intake.
FILDREN is a high-performance drainage pipe system manufactured from high-density polyethylene (HDPE) or polypropylene (PP), designed for underground groundwater drainage applications.
BLACKDREN is a double-wall corrugated pipe system manufactured from high-density polyethylene (HDPE), designed for efficient underground drainage and groundwater management.
BIG DREN is a high-performance double-wall corrugated pipe system manufactured from high-density polyethylene (HDPE), designed for underground drainage and groundwater management applications.
System Group PVC threaded and micro-slotted pipes are designed to provide efficient subsoil drainage by both collecting excess groundwater and conveying it safely into drainage lines.
PE 80 solid wall pipes are manufactured from high-quality polyethylene with a Minimum Required Strength (MRS) of 8 MPa and a design stress (σS) of 6.3 MPa.
PE100 solid wall pipes are manufactured from high-performance polyethylene (PE100), offering a Minimum Required Strength (MRS) of 10 MPa and a design stress (σS) of 8 MPa.
EuroPas Evolution PE100 RC Type 1 pipes are manufactured from high-density polyethylene (HDPE) PE100 RC (Resistant to Crack) and are specifically engineered for pressurised water distribution networks, including potable water applications.
EUROPAS SAFE10 is a premium PE100 RC (Resistant to Crack) Type 2 solid wall pipe system developed for pressurised potable water networks.
PE100 FLEX is a high-performance solid wall pipe system manufactured from high-density polyethylene (PE100), offering a Minimum Required Strength (MRS) of 10 MPa and a design stress (σS) of 8.0 MPa.
RioFlex™ is a lightweight polyethylene layflat hose designed for water distribution in drip and sprinkler irrigation systems.
TUBONE is a high-performance polyethylene pipe system manufactured from medium-density (MDPE) or high-density polyethylene (HDPE), specifically designed for use with self-propelled irrigation machines.
Drip Line is a polyethylene (PE) irrigation pipe designed to deliver precise, efficient watering for a wide range of landscaping and agricultural applications.
MAGO™, SKY™ and SABTAPE™ are high-performance drip tape solutions designed for the efficient irrigation of horticultural crops and large-scale agricultural applications.
SGPVC Pressure is a solid wall PVC-U pipe system engineered for pressurised water distribution and industrial fluid conveyance.
IDROWELL is a high-quality PVC solid wall pipe system specifically designed for borehole lining and groundwater extraction applications.
KGEM Pipe with socket SN 4 Coex DN/OD 110 x 3000 mm
MPN: CSS0154-00001
KGEM Pipe with socket SN 4 Coex DN/OD 110 x 6000 mm
MPN: CSS0154-00002
KGEM Pipe with socket SN 4 Coex DN/OD 160 x 3000 mm
MPN: CSS0154-00003
KGEM Pipe with socket SN 4 Coex DN/OD 160 x 6000 mm
MPN: CSS0154-00004
KGB Bend DN/OD 110 15°
MPN: CSS0154-00005
KGB Bend DN/OD 110 30°
MPN: CSS0154-00006
KGB Bend DN/OD 110 45°
MPN: CSS0154-00007
KGB Bend DN/OD 110 87,5°
MPN: CSS0154-00008
KGB Bend DN/OD 160 15°
MPN: CSS0154-00009
KGB Bend DN/OD 160 30°
MPN: CSS0154-00010
KGB Bend DN/OD 160 45°
MPN: CSS0154-00011
KGB Bend DN/OD 160 87,5°
MPN: CSS0154-00012
KGBD Bend 2M DN/OD 110 15°
MPN: CSS0154-00013
KGBD Bend 2M DN/OD 110 30°
MPN: CSS0154-00014
KGBD Bend 2M DN/OD 110 45°
MPN: CSS0154-00015
KGB Bend 1M SW DN/OD 110 87,5 °
MPN: CSS0154-00016
KGBD Bend 2M SW DN/OD 110 87,5°
MPN: CSS0154-00017
KGEA Branch DN/OD 110/110 45°
MPN: CSS0154-00018
KGEA Branch DN/OD 160/110 45°
MPN: CSS0154-00019
KGEA Branch DN/OD 160/160 45°
MPN: CSS0154-00020
KGEA Branch DN/OD 110/110 87,5°
MPN: CSS0154-00021
KGEA Branch DN 160/110 87°
MPN: CSS0154-00022
KGEA Branch DN 160/160 87°
MPN: CSS0154-00023
KGEA Triple Socket Branch DN/OD 110/110 45°
MPN: CSS0154-00024
KGEA Triple Socket Branch DN/OD 110/110 87,5°
MPN: CSS0154-00025
KGAM Single socket DN/OD 110
MPN: CSS0154-00026
KGK Cap DN 110
MPN: CSS0154-00027
KGK Cap DN 160
MPN: CSS0154-00028
KGM Plug DN/OD 110
MPN: CSS0154-00029
KGM Plug DN/OD 160
MPN: CSS0154-00030
KGMM Double Socket DN/OD 110
MPN: CSS0154-00031
KGMM Double Socket DN/OD 160
MPN: CSS0154-00032
KGU Coupler DN/OD 110
MPN: CSS0154-00033
KGU Coupler DN/OD 160
MPN: CSS0154-00034
KGR Reducer, eccentric DN/OD 160/110
MPN: CSS0154-00035
KGRE Inspection Pipe DN/OD 110 angular
MPN: CSS0154-00036
KGRE Inspection Pipe DN/OD 160 angular
MPN: CSS0154-00037
KGRE Inspection Pipe DN/OD 110 round
MPN: CSS0154-00038
KGRE Inspection Pipe DN/OD 160 round
MPN: CSS0154-00039
Lip seal DN 110 (KG)
MPN: CSS0154-00040
Lip seal DN 160 (KG)
MPN: CSS0154-00041
NBR Lip seal oil resistant DN 110 (KG/HT/Sk)
MPN: CSS0154-00042
NBR Lip seal oil resistant DN 160 (KG/HT)
MPN: CSS0154-00043
Lubricant 500 g
MPN: CSS0154-00044
Lubricant 3000 g
MPN: CSS0154-00045